| Project by mikethetermite | posted 08-04-2010 04:52 AM | 2704 views | 2 times favorited | 7 comments |  |
 |
The local mill had some cherry boards 2”, 3”, and a few 4” X 3/4” about 3’ long the cost? FREE!!!
Made for a lot of gluing but it turned out well and cherry always looks good. Cannot find any of the gluing up pictures. Used plywood for the back. Nothing fancy just plain box construction. Will need to make a better top and fence later on.
-- Mike The Termite ~~~~~ Working safely may get old, but so do those who practice it.
7 comments so far
mikedddd
home | projects | blog
148 posts in 4685 days
#1 posted 08-04-2010 05:16 AM
Looks like it cost you a fortune. Nice job.
-- Mike
Karson
home | projects | blog
35300 posts in 5855 days
#2 posted 08-04-2010 05:35 AM
Nice use of free wood.
A great looking router table.
-- I've been blessed with a father who liked to tinker in wood, and a wife who lets me tinker in wood. Appomattox Virginia [email protected] †
Richard
home | projects | blog
11310 posts in 4488 days
#3 posted 08-04-2010 07:38 AM
Can’t beat FREE wood. Nice job!
-- Richard (Ontario, CANADA)
Ken90712
home | projects | blog
18113 posts in 4644 days
#4 posted 08-04-2010 11:14 AM
Nice job, cool you got Cherry for free.
-- Ken, "Everyday above ground is a good day!"
Sheila Landry (scrollgirl)
home | projects | blog
9239 posts in 4375 days
#5 posted 08-04-2010 02:57 PM
It really is a beauty! Nice job!
-- Designer/Artist/Teacher. Owner of Sheila Landry Designs (http://www.sheilalandrydesigns.com) Scroll saw, wood working and painting patterns and surfaces. "Knowledge is Power"
lew
home | projects | blog
13533 posts in 5210 days
#6 posted 08-05-2010 02:15 AM
Cool, Mike!!!
Lew
-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.
Big_Eddy
home | projects | blog
57 posts in 4337 days
#7 posted 08-19-2010 05:34 AM
That is awesome… I’d like to see the components of the top… :) thanks for sharing
-- If i'd a knowed you coulda goed I'd a seen you gotta went
Have your say...