LumberJocks

Bedside Table Stands

  • Advertise with us
Project by mochasatin posted 12-19-2017 02:36 PM 1477 views 3 times favorited 13 comments Add to Favorites Watch

This is a pair of bedside tables I just finished. There was very little room available next to the bed so I had to make them narrow. They are 29” tall and the top is 10”x10”.

-- Scott





13 comments so far

View Dave Polaschek's profile

Dave Polaschek

3556 posts in 910 days


#1 posted 12-19-2017 04:37 PM

Sharp-looking tables!

-- Dave - Minneapolis

View Mark's profile

Mark

994 posts in 2302 days


#2 posted 12-19-2017 04:42 PM

Nice job on the tables Scott. Your project turned out very well. Iknow what ya mean about the not much room. I’m building a pair of tables to fit in a 16” space.

-- Mark

View Ron Aylor's profile

Ron Aylor

2649 posts in 975 days


#3 posted 12-19-2017 04:43 PM

Here’s to concurring the tight space. Looks good. Kudos!

View mochasatin's profile

mochasatin

152 posts in 3291 days


#4 posted 12-19-2017 04:53 PM

Tight spaces seem to be a common problem. We just needed a place to put coffee cups!

-- Scott

View Ron Aylor's profile

Ron Aylor

2649 posts in 975 days


#5 posted 12-19-2017 05:30 PM



Tight spaces seem to be a common problem. We just needed a place to put coffee cups!

- mochasatin

That’s funny … when my bride and I were first married we had a small 9” diameter candle stand we used as a bedside table … held two very large coffee cups, an ashtray, and at times an eight pound cat!

View drewpy's profile

drewpy

843 posts in 1685 days


#6 posted 12-19-2017 06:22 PM

Well done. It’s nice to see your skills provide a solution for tight spaces.

-- Drew -- "The greatest wealth is health".

View helluvawreck's profile

helluvawreck

32086 posts in 3194 days


#7 posted 12-19-2017 09:29 PM

This is a nice set of stands and has been done so nicely.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com

View madts's profile

madts

1892 posts in 2668 days


#8 posted 12-19-2017 11:05 PM

Very well done.. I like the style of legs, that I call Bayonet style. Just love them.

—Madts.

-- Thor and Odin are still the greatest of Gods.

View mochasatin's profile

mochasatin

152 posts in 3291 days


#9 posted 12-20-2017 12:32 AM

Thanks. They are going in our craftsman home build in 1920 so I wanted a simple, strong design for the tables.


Very well done.. I like the style of legs, that I call Bayonet style. Just love them.

—Madts.

- madts


-- Scott

View Fiddy's profile

Fiddy

208 posts in 1638 days


#10 posted 12-20-2017 10:47 AM

Very nice – what is the center “panel” hard to tell what I’m looking at in the picture?

View mochasatin's profile

mochasatin

152 posts in 3291 days


#11 posted 12-20-2017 01:20 PM

The center panel is just a piece of tile my wife picked out and installed on each stool.


Very nice – what is the center “panel” hard to tell what I’m looking at in the picture?

- Fiddy


-- Scott

View majuvla's profile

majuvla

14164 posts in 3195 days


#12 posted 12-20-2017 02:57 PM

I like joinery in this project. Very well adjusted to space available beside you bed.

-- Ivan, Croatia, Wooddicted

View steliart's profile

steliart

2894 posts in 3016 days


#13 posted 12-20-2017 07:08 PM

very elegant in did !!!

-- Stelios L.A. Stavrinides: - I am not so rich to buy cheap tools, but... necessity is the mother of inventions !!!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com