| Project by Kindlingmaker | posted 07-29-2010 07:48 PM | 2367 views | 0 times favorited | 5 comments |  |
 |
Two projects to try something different and to use fall offs. The large chip and dip bowl was made using a CMT router bit and extension. The wood is Alder and the finish is Waterlox. The cutting board was made from the fall offs of the chip bowl and then trimmed with Red Oak and finished with Tung oil. Both project were fun except the sanding of the chip bowl…
-- Never board, always knotty, lots of growth rings
5 comments so far
Big_Bob
home | projects | blog
173 posts in 4041 days
#1 posted 07-29-2010 08:10 PM
Kindlingmaker:
Nice work! By saving wood, you are saving trees and branches :).
They look really good.
-- Bob Clark, Tool Collector and Sawdust Maker
GMman
home | projects | blog
3902 posts in 4029 days
#2 posted 07-30-2010 12:20 AM
Great work thanks for posting
majuvla
home | projects | blog
14189 posts in 3199 days
#3 posted 07-30-2010 09:10 PM
Very nice bowl.I realy have to try to do something like that.
-- Ivan, Croatia, Wooddicted
MickeyD
home | projects | blog
130 posts in 3858 days
#4 posted 08-04-2010 05:07 PM
Now can I use the cutting board?
-- -Willing to try
Kindlingmaker
home | projects | blog
2658 posts in 3858 days
#5 posted 08-04-2010 08:30 PM
Yes dear…
-- Never board, always knotty, lots of growth rings
Have your say...