Rocking Horse

  • Advertise with us
Project by Iggy2000 posted 11-01-2017 04:03 PM 1397 views 0 times favorited 4 comments Add to Favorites Watch

Rocking horse made from construction grade 2×10 from big box store. One of my first bandsaw projects.

-- Phil

4 comments so far

View Ivan's profile


16044 posts in 3666 days

#1 posted 11-01-2017 06:11 PM

It’s realy beautiful. I have small nephews, now I have idea what to make them for birthadays someday.

-- Ivan, Croatia, Wooddicted

View htl's profile


5161 posts in 1958 days

#2 posted 11-01-2017 10:54 PM

Way cute little horsy!!!

-- An Index Of My Model making Blogs

View Mark Gipson's profile

Mark Gipson

189 posts in 4179 days

#3 posted 11-02-2017 08:33 AM

I have the same plans but not built yet. Did you bolt / screw the legs on to make it easier to get everything aligned during glue up? I was thinking of doing the same thing.

View Iggy2000's profile


45 posts in 1421 days

#4 posted 11-03-2017 01:00 AM

Mark, I used carriage bolts for the legs to body for strength, hoping it gets ridden hard by the young rider! I also used star drive ledger lags for the rockers to stringers and legs to stringers with button caps to cover. I attached the stringers to the rockers, the four legs to the stringers, and then clamped the body in between the legs to get the alignment right, drilled through legs and body and inserted carriage bolts one by one, etc. I may have a few more in progress photos that I can add.

-- Phil

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics