Box full of Chisels?

  • Advertise with us
Project by Kilo19 posted 10-30-2017 02:14 PM 1153 views 0 times favorited 2 comments Add to Favorites Watch

Recently I bought some cheap chisels, and even though I didn’t spend a lot of money on them, I still wanted a way to keep them put away cleanly.

I had some maple pallet wood that I milled done into some boards (1/2”x3”) glued them into panels for the Lid and Bottom. The sides were just one piece. I dovetail cut the corner joints. Boy was that the hardest time I had. (course it was my first set of dovetails I had ever cut) Learned a lot, and still have a lot to learn.

After the box was made, I put on some simple hinges and latches. The foam actually was recycled from our couch that was used to protect it. I cut the foam (about 1/8” thick) into squares about the size of the box. I glued about 20/30 or so of them on top of each other. Then sized the “block” into the box. Then laid out and cut the profile of the chisels to fit. I still have a layer or two of lacquer to spray.

-- Justin

2 comments so far

View a1Jim's profile


118065 posts in 4346 days

#1 posted 10-30-2017 02:49 PM

Justin Welcome to Ljs, Good job on the box great idea.


View helluvawreck's profile


32122 posts in 3636 days

#2 posted 10-30-2017 06:31 PM

These are great chisel organizers.

helluvawreck aka Charles

-- helluvawreck aka Charles,

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics