Project by Natobious | posted 10-22-2017 12:04 AM | 1678 views | 1 time favorited | 3 comments | ![]() |
![]() |
A Puma logo for the wall in my computer room.
Originally was going to be MDF surface and pine… But the XPS foam prototype worked so well I just spackled and painted the foam. Tail and legs are attached to the body with “3M white great stuff”
It is mounted to the wall on wooden pegs.
3 inches thick – 5 foot span.
Weight about 2 pounds.
Created in Fusion360 – Milled on a 2448 Zenbot
3 comments so far
Jim Jakosh
home | projects | blog
27827 posts in 4602 days
#1 posted 10-22-2017 01:23 AM
Nice puma!!
Jim
-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!
irtamos
home | projects | blog
325 posts in 3540 days
#2 posted 10-22-2017 08:19 AM
Well done!
-- irtamos, Belgium
helluvawreck
home | projects | blog
32122 posts in 4363 days
#3 posted 10-22-2017 01:20 PM
This is very attractive and a real eye catcher. Nice work.
helluvawreck aka Charles
http://woodworkingexpo.wordpress.com
-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com
Have your say...