| Project by EdsCustomWoodCrafts | posted 10-19-2017 04:38 PM | 2941 views | 10 times favorited | 8 comments |  |
 |
Special thanks go out to DIY TYLER for this project I came across it in his YouTube channel and plans can be downloaded from here
This is a great scrap wood project …
The unit can probably hold upto 5 nail guns if standard size and it also has to drawer nothing fancy just glue and Brad nails
1 drawer holds nails
And the other staples .. I built some dividers out of scrap 1/4” MDF and just cut groves out so as that they can slide into each other finally got my label maker to distinguish the various Gauges and Brad length and to be honest it came out great
What I don’t like is the Brad and glue joinery because I only used 1/2” plywood and obviously not Very skilled at shooting into thin plywood like I blew a coupled of brads and missed the mating piece
But practice makes perfect
Anyway hope you like
Have a great day
-- Thanks Ed “A bad day woodworking is better than a good day working. ~Author unknown”
8 comments so far
woodshaver Tony C
home | projects | blog
6430 posts in 3686 days
#1 posted 10-19-2017 09:55 PM
All nice and neat…. Great job Ed!
-- St Augustine FL, Experience is the sum of our mistakes!
EdsCustomWoodCrafts
home | projects | blog
901 posts in 1676 days
#2 posted 10-19-2017 11:17 PM
Thanks Tony .. my next project I think might be a tablesaw accessories cabinet that fits under the right wing !!!!-- Thanks Ed “A bad day woodworking is better than a good day working. ~Author unknown”
helluvawreck
home | projects | blog
32086 posts in 3200 days
#3 posted 10-20-2017 01:44 PM
Wow! This is a great air tool cabinet. Congratulations; it’s a nice addition to your shop.
helluvawreck aka Charles
http://woodworkingexpo.wordpress.com
-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com
EdsCustomWoodCrafts
home | projects | blog
901 posts in 1676 days
#4 posted 10-20-2017 02:23 PM
Thanks Charles much appreciated I didn’t think I would get a top 3 for it it’s basically a box with 2 boxes inside it lol
-- Thanks Ed “A bad day woodworking is better than a good day working. ~Author unknown”
MT_Stringer
home | projects | blog
3183 posts in 3564 days
#5 posted 10-20-2017 03:35 PM
-- Handcrafted by Mike Henderson - Channelview, Texas
Woodknack
home | projects | blog
12739 posts in 2713 days
#6 posted 10-20-2017 10:24 PM
DIY Tyler is one of my favorite YT channels and I’ve been wanting to make one of these for some time. Well done.
-- Rick M, http://thewoodknack.blogspot.com/
tupes
home | projects | blog
5 posts in 543 days
#7 posted 10-29-2017 09:10 PM
Nice work, I may have to try that out myself
-- TT, Illinois
000
home | projects | blog
2859 posts in 1233 days
#8 posted 10-29-2017 09:43 PM
Looks good!
I flip my guns over, then every week or so I put a few drops of oil in them and let gravity do it’s work.
Have your say...