Different oak frame design for latest stained glass project

I just finished my latest stain glass project, from a pattern named “Falling Leaves”.

I have made a couple of oak frames for past stained glass projects, but decided to use a different approach to the oak frame on this project.

I ran across a framing method on a web site that sells frame wood stock, and accessories for hanging stained glass. The frame design utilizes a 5/16” wide groove with the tops of the grooves radiused. I figured out how to make this style of frame using my router table.

This method glues and screws the bottom 2 joints of the frame. The top 2 joints are screwed, but not glued….....so you can install and remove the stained glass panel. It also uses brass hooks mounted on the side rails to attach a hanging chain to.

I like this frame methodology and plan on using it for future projects.

To see my Trials & Tribulations on this project, see my woodworking web site.

Thanks!

-- Dale, Illinois, http://dalemaley.webs.com/