Project by stewball | posted 10-15-2017 06:54 PM | 1418 views | 1 time favorited | 2 comments | ![]() |
![]() |
This is a bottle opener that i built with inspiration from here.
This one is made to not dent the caps. Works very well.
The depth from the washer down and the curve in the washer are key.
I put a rare earth magnet to catch the caps, and to hide the forstner point.
2 comments so far
PurpLev
home | projects | blog
8654 posts in 5143 days
#1 posted 10-15-2017 06:58 PM
pretty cool :)
-- ㊍ When in doubt - There is no doubt - Go the safer route.
helluvawreck
home | projects | blog
32122 posts in 4361 days
#2 posted 10-18-2017 09:43 PM
You did a nice job on this opener.
helluvawreck aka Charles
http://woodworkingexpo.wordpress.com
-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com
Have your say...