Entry Table

  • Advertise with us
Project by TechTeacher04 posted 10-11-2017 12:15 PM 1003 views 2 times favorited 4 comments Add to Favorites Watch

Figured walnut top, Maple legs and apron . Domino joints were used between the legs and apron. The legs are tapered on the two inside faces, done on the table saw with a shop made taper jig. Lacquer finish on the top, poly on the legs and apron.

The top is 42”x12”
The legs are 1-5/8” at the top and 1” at the bottom
It is 31” tall, I originally planned for it to be 30” but I must have had a reason to make that size.

4 comments so far

View ScottM's profile


748 posts in 2949 days

#1 posted 10-11-2017 04:04 PM

Very nice. I’m actually in the planning stages of a similar type table. Can you tell me the dimensions of your legs; top size and ending taper size?

View a1Jim's profile


118080 posts in 4380 days

#2 posted 10-11-2017 04:28 PM

Nice table beyond the basis for sure.


View ScottM's profile


748 posts in 2949 days

#3 posted 10-12-2017 11:32 AM

Thanks for the update! Was curious how my “plan” compared to others.

View helluvawreck's profile


32122 posts in 3669 days

#4 posted 10-12-2017 12:45 PM

This table turned out nicely.

helluvawreck aka Charles

-- helluvawreck aka Charles,

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics