LumberJocks

first bandsaw box

  • Advertise with us
Project by woodkiller posted 06-28-2010 01:06 PM 2261 views 2 times favorited 16 comments Add to Favorites Watch

This is my first attempt at a bandsaw box. It from a solid piece of red cedar. I sanded it to 320 grit and finished it with Deft spray Lacquer. Only a couple of little problems with it, BUT I HAD FUN! I did just get a 14” Jet bandsaw and a rigid sander and planer all were very useful with this project. Any comments are welcome. Thanks for looking. Russell





16 comments so far

View CreekWoodworker's profile

CreekWoodworker

409 posts in 4385 days


#1 posted 06-28-2010 01:27 PM

Nice box. I like the wood grain pattern. I haven’t tried making one out of a solid block of wood yet.

-- Mike ...Success is often the result of taking a misstep in the right direction

View Don Alexander's profile

Don Alexander

14 posts in 4776 days


#2 posted 06-28-2010 02:17 PM

Looks like you just got one crack in the wood. When I build with cedar, it seems to crack all over the place. Nice job on it.

-- Don Alexander, Jacksonville, Florida

View woodkiller's profile

woodkiller

103 posts in 4026 days


#3 posted 06-28-2010 03:22 PM

Hey Don that Cedar was cracked before I started. I have had it in the basement for about 1 year. I am going to do more of these, I like the way it turned out.

View Woodwrecker's profile

Woodwrecker

4240 posts in 4663 days


#4 posted 06-28-2010 03:31 PM

Nice job.
That grain pattern on the sides is sweet!

View Ken90712's profile

Ken90712

18001 posts in 4276 days


#5 posted 06-28-2010 03:45 PM

Good looking box, I’m not a master on these either. So it will be interesting to hear what they say so I can learn as well. Keep it up!

-- Ken, "Everyday above ground is a good day!"

View JVallario's profile

JVallario

76 posts in 4238 days


#6 posted 06-28-2010 05:00 PM

great box

-- John

View Porosky's profile

Porosky

619 posts in 4452 days


#7 posted 06-28-2010 05:18 PM

Good use of a block containing pith. Not much else to do with pith. Good idea!

-- There's many a slip betwixt a cup and a lip.--Scott

View ratchet's profile

ratchet

1391 posts in 4874 days


#8 posted 06-28-2010 07:10 PM

Very appealing box. Well done!

View a1Jim's profile

a1Jim

118162 posts in 4664 days


#9 posted 06-28-2010 07:11 PM

Super looking first box

-- https://www.artisticwoodstudio.com/videos

View lanwater's profile

lanwater

3113 posts in 4021 days


#10 posted 06-28-2010 10:26 PM

I like the way it turned out too.

Great job.

-- Abbas, Castro Valley, CA

View imallchalkedup's profile

imallchalkedup

393 posts in 4069 days


#11 posted 06-28-2010 11:55 PM

nice job on your bandsaw box

-- RStadler

View MOJOE's profile

MOJOE

571 posts in 4356 days


#12 posted 06-29-2010 01:02 AM

Nice Job, I also just purchased a Jet 14” bandsaw. I think I might have to try my hand at a bandsaw box now…...better watch SteveinMarin’s video again.

-- Measuring twice and cutting once only works if you read the tape correctly!

View Kathy's profile

Kathy

210 posts in 4009 days


#13 posted 06-29-2010 01:57 PM

This is so cool!!! I can’t wait to get a bandsaw and try it.

-- curious woodworker

View shopmania's profile

shopmania

702 posts in 4270 days


#14 posted 06-29-2010 08:18 PM

Nice job, beautiful grain pattern!

-- Tim, Myrtle Beach, [email protected] Just one more tool, that's all I need! :)

View MickeyGee's profile

MickeyGee

119 posts in 3981 days


#15 posted 06-29-2010 08:28 PM

Can’t wait to try one of these! I really like the grain – overall looks great

-- -- Mike

showing 1 through 15 of 16 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com