crosscut sled

  • Advertise with us
Project by abish0220 posted 09-30-2017 07:17 PM 1204 views 0 times favorited 4 comments Add to Favorites Watch
crosscut sled
crosscut sled No picture No picture No picture No picture No picture
Zoom Pictures

I just finished this crosscut sled. I used 3/4 inch mdf and some cherry scrap I had left over from a cutting board I am working on. I ripped the sliders to height and then crept up on the width with a thickness planer. I used Johnson paste wax on my table saw and in the miter slots and this sled works great, no slop and slides perfect. Back to work now on a cherry endgrain cutting board.

4 comments so far

View Jim Jakosh's profile

Jim Jakosh

24922 posts in 3904 days

#1 posted 10-01-2017 06:52 PM

Nice sled . You’ll find that very handy in the shop!!


-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View dannmarks's profile


1017 posts in 1380 days

#2 posted 10-02-2017 01:59 AM

Yes I made one this weekend my self. Mine is so not pretty at all. Half inch plywood and 2×4’s. But it is for doing dado’s on shelves that will look nice when completed. Nice job on yours. Oh I think mine is lighter than yours though. Particle Board is very heavy.

View abish0220's profile


10 posts in 1042 days

#3 posted 10-02-2017 02:14 AM

it is a little heavy but I had all the stuff just sitting in the shop so I figured just use what I got.

View helluvawreck's profile


32122 posts in 3665 days

#4 posted 10-02-2017 08:00 PM

That’s a very nice sled.

helluvawreck aka Charles

-- helluvawreck aka Charles,

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics