LumberJocks

1st 3d cutting board

  • Advertise with us
Project by abish0220 posted 09-26-2017 01:05 AM 2608 views 1 time favorited 15 comments Add to Favorites Watch
1st 3d cutting board
1st 3d cutting board No picture No picture No picture No picture No picture
Zoom Pictures

I was making this as a house warming present for a friend and goofed up during the glue up.





15 comments so far

View TungOil's profile

TungOil

1328 posts in 1000 days


#1 posted 09-26-2017 01:18 AM

goofed up?? nahhhh….”meant to do that”. Looks great.

-- The optimist says "the glass is half full". The pessimist says "the glass is half empty". The engineer says "the glass is twice as big as it needs to be"

View abish0220's profile

abish0220

10 posts in 748 days


#2 posted 09-26-2017 01:30 AM

Thank you.

View DMiller's profile

DMiller

508 posts in 978 days


#3 posted 09-26-2017 03:04 AM

Very Cool….wouldn’t have noticed the “meant to do that” unless you had mentioned it! That looks really nice!

-- Dale Miller Modesto, CA "I can do all things through Christ, which strengtheneth me." Philippians 4:13. "Woodworking minus patience equals firewood."

View jim65's profile

jim65

1018 posts in 2438 days


#4 posted 09-26-2017 09:27 AM

My father always told me it’s “character”. I think it looks great!

-- Jim, Marostica Italy

View recycle1943's profile

recycle1943

3250 posts in 2127 days


#5 posted 09-26-2017 10:21 AM

I see a really nice board and some character – hard not to like it

-- Dick, Malvern Ohio - my biggest fear is that when I die, my wife sells my toys for what I told her I paid for them

View EricTwice's profile

EricTwice

248 posts in 1038 days


#6 posted 09-26-2017 10:38 AM

I like it, sameness is over rated,

you should play with it and see what visual design effects can be created doing that on purpose.

-- nice recovery, They should pay extra for that mistake, Eric E.

View Ivan's profile

Ivan

15054 posts in 3372 days


#7 posted 09-26-2017 11:16 AM

I never stop admireing to this 3D patern. Beautiful work.

-- Ivan, Croatia, Wooddicted

View Mikesawdust's profile

Mikesawdust

329 posts in 3544 days


#8 posted 09-26-2017 11:20 AM

I like the variation, looks like one of those impossible drawings with the stairs

-- You never cut a piece to short, you are just prepping that piece for a future project

View helluvawreck's profile

helluvawreck

32086 posts in 3372 days


#9 posted 09-26-2017 01:29 PM

You may have made a couple of mistakes on the pattern but you sure did a first class on the rest of the work. This is a nice board and you can always make some more that are perfect. Nice work!

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com

View WayneC's profile

WayneC

14358 posts in 4602 days


#10 posted 09-26-2017 03:19 PM

It came out very well. Like it.

-- We must guard our enthusiasm as we would our life - James Krenov

View InNae1's profile

InNae1

1 post in 942 days


#11 posted 09-26-2017 03:27 PM

I think that’s called glitch. Kind of something the kids are into these days. That’s what I would call it anyway. Looks great.

View pottz's profile

pottz

6311 posts in 1489 days


#12 posted 09-26-2017 03:37 PM

i actually like your goof up,makes it more interesting.welcome to lumber jocks.

-- sawdust the bigger the pile the bigger my smile-larry,so cal.

View bobasaurus's profile

bobasaurus

3604 posts in 3689 days


#13 posted 09-26-2017 08:25 PM

Hah, that looks beautiful but it would be kind of infuriating to look at… like one tile out of place on a floor. But your glue lines look clean, so your woodworking skills are top notch.

-- Allen, Colorado (Instagram @bobasaurus_woodworking)

View doubleG469's profile

doubleG469

853 posts in 949 days


#14 posted 09-26-2017 08:48 PM

Did you glue up each individual section? I hate when that happens and it has happened to me on several boards. Luckily not a 3d board that takes that much effort. Good job on the “proof of concept” board. Or that’s at least what I would call it.

-- I refuse to edit the photo orientation for this website any longer. It’s an issue they should address and correct. Gary, Texas

View calisdad's profile

calisdad

334 posts in 2015 days


#15 posted 09-27-2017 02:11 PM

You couldn’t have goofed up any better.
Awesome.

-- Groveland, CA.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com