LumberJocks Woodworking Forum banner

Project Information

This is my take on a valet mirror I had seen in a magazine a few years back this is made from a single 1/2 red oak board with cherry splines and a cherry knob I turned on the lathe I finished this with walnut Danish oil and 6 coats of wipe on poly sanding in between each coat and ending with furniture wax, The mirror had a scratch across the middle not sure when that happened but I did change it out with a mirror I picked up at the dollar store for 3 bucks

Gallery

Comments

· Registered
Joined
·
186 Posts
WOW this is really kewl, I love the design. Never seen anything like this before.
 
Top