Sushi Board

  • Advertise with us
Project by Ben posted 08-03-2017 06:38 PM 948 views 4 times favorited 1 comment Add to Favorites Watch

We eat a lot of sushi in my house, so…sushi board! I cut a seven degree bevel on all outside edges, and that presented an interesting challenge for a beginner like me. For safety reasons, I wanted to cut the bevel on the board prior to attaching the legs. (I cut this at the table saw). I then used the miter gauge to cut the bevel on the legs, and it took quite a bit of sneaking up on exactly the right length…followed by a lot of sanding the end grain of that purpleheart, which is slow going.

Overall, a fun little project! Cherry, purpleheart and hard maple.

1 comment so far

View helluvawreck's profile


32122 posts in 3674 days

#1 posted 08-04-2017 02:43 PM

This is a beautiful sushi board. Nice work!

helluvawreck aka Charles

-- helluvawreck aka Charles,

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics