Dry Erase Marker Shelf

  • Advertise with us
Project by grumpybear7357 posted 07-27-2017 01:47 AM 1058 views 0 times favorited 3 comments Add to Favorites Watch

A friend asked if I could make him a small shelf to hold dry erase markers in his wife’s home office. I had a piece of 4/4 white oak that fit the bill. I recently purchased a Rikon 10-326 bandsaw and have enjoyed its resaw capabilities. I ran the 4/4 oak piece (approximately 4×18 inches) through the bandsaw and after cleanup on the jointer had two 3/8×18 x 4 inch pieces. I made simple radius curves on the shelf corners, then added a scollop to the top. All edges were treated to a 1/8 inch round over. I cut a cup in the shelf by running the shelf across the table saw at an angle. A little sanding, MinWax Pecan stain, and two coats of BLO/satin poly/mineral spirits in a 1:1:1 ratio. Turned out nice. He loved it. Hope his wife does. Neat little project.

-- Never Underestimate an Old Man with a Tractor...

3 comments so far

View bruc101's profile


1417 posts in 4601 days

#1 posted 07-27-2017 03:31 AM

Pretty work

-- Bruce Free Plans

View helluvawreck's profile


32122 posts in 3925 days

#2 posted 07-27-2017 04:40 PM

This is a very attractive shelf. Nice work.

helluvawreck aka Charles

-- helluvawreck aka Charles,

View grumpybear7357's profile


45 posts in 1704 days

#3 posted 07-28-2017 11:51 PM

Thanks for the comments guys.

-- Never Underestimate an Old Man with a Tractor...

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics