Board and Batten Shutters

  • Advertise with us
Project by Gregg M. posted 07-13-2017 07:41 PM 1073 views 1 time favorited 2 comments Add to Favorites Watch

These shutters were made for a customer. They are made out of cedar. The boards are joined together using loose tenons. The battens sit in a shallow dado and are screwed into the boards using SS screws (no glue). The shutters were finished using an oil based primer and an exterior latex from SW. The primer was sprayed and the paint was brushed on.

-- Marvel Woodworking, West Chester, PA -

2 comments so far

View helluvawreck's profile


32122 posts in 3667 days

#1 posted 07-13-2017 08:14 PM

Gregg, you did a nice job on these shutters.

helluvawreck aka Charles

-- helluvawreck aka Charles,

View Jim Jakosh's profile

Jim Jakosh

24924 posts in 3906 days

#2 posted 07-14-2017 02:40 AM

Nice set of shutters!!

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics