Another tool tote

  • Advertise with us
Project by stretchBrian posted 07-09-2017 01:05 PM 990 views 2 times favorited 1 comment Add to Favorites Watch

Made this for my son-in-law 32th birthday.

The ends are 3/4” maple, sides are 1/2” maple, bottom is 1/4” baltic birch plywood, 1 inch dowel for the handle and I turned the handle ends out of a scrap piece of walnut I had lying around. Finished it with shellac (I was running out of time!!!).

All glued together, no metal.

All the maple came from an end table that was being thrown out by a friend (same end table i used to to make my sons tool tote).

First time I used my new branding iron, worked better than expected.

-- Brian

1 comment so far

View helluvawreck's profile


32122 posts in 3754 days

#1 posted 07-09-2017 05:54 PM

This is a nice and practical wood tote. Nice work.

helluvawreck aka Charles

-- helluvawreck aka Charles,

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics