Rollout Cart for my benchtop tools

  • Advertise with us
Project by Rwolinski posted 07-07-2017 05:08 PM 1054 views 0 times favorited 1 comment Add to Favorites Watch

As I’ve already stated I have a very small shop, so I needed a way to get my bench top tools out for use and then roll away for storage when not in use.
I made this cart out of a few pieces of 4×4x3/4 AC Plywood and some left over oak and maple I had from other projects.
Casters work great and all 4 swivel. that was the key to get it tucked away easily.
Danish oil over the whole thing.
The spindle sander and drills in the bottom as some nice vibration dampening benefits too.
Only thing I didn’t do on this was dovetail the drawers. I used lock joints on all four corners.

-- What I make is for others....How I make it is for me.

1 comment so far

View TungOil's profile


1382 posts in 1303 days

#1 posted 07-07-2017 06:34 PM

looks good- great use of space and good way to use up the ‘leftovers’ that can quickly fill up any shop. Nothing wrong with lock miter joints!

-- The optimist says "the glass is half full". The pessimist says "the glass is half empty". The engineer says "the glass is twice as big as it needs to be"

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics