New Welcome Sign for local park

  • Advertise with us
Project by DaleMaley posted 05-24-2017 01:24 PM 1179 views 0 times favorited 2 comments Add to Favorites Watch

I am designing and renovating our old park in our small town. One of the upgrade projects is to replace the worn out welcome sign with a new one. I donate my labor on these projects, and a local non-profit picks up my material expenses.

I designed the new sign in Sketchup. I used a pressure-treated 2×4 frame, with 1/2” exterior plywood. I made quarter-round to secure the sign from pressure-treated wood.

A local printing firm has a 52” wide printer he uses primarily for printing decals to decorate 18-wheelers…......but it also makes good signs. I provide the art work, and they print up my signs.

Both the old and new signs are pretty heavy, so I rigged up a 2-rope method for both lowering the old sign and raising the new sign, which worked pretty slick.

You can see my Trials & Tribulations on this project at my woodworking web site.


-- Dale, Illinois,

2 comments so far

View GR8HUNTER's profile


9305 posts in 2044 days

#1 posted 05-24-2017 02:16 PM

looking very nice Dale … I said before you really care about your town …and it shows …..oh yeah looks like that Ford tool worked very well …...GREAT JOB :<))

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN :<))

View Derek Oliver's profile

Derek Oliver

264 posts in 3483 days

#2 posted 05-24-2017 05:26 PM

That’s great. I hope the folks of your town appreciate your efforts.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics