LumberJocks

Tea Light Holders

  • Advertise with us
Project by Ivan posted 05-13-2010 02:43 AM 1416 views 1 time favorited 3 comments Add to Favorites Watch

Tea light holders made from scraps. Laminated 2 or more pieces and then turned then on the lathe. Noticed that the wood was too hard for a normal roughing gouge so I used a heavy scraper and it turned nicely.

I found the easiest way to mount them was to drill a hole through the center of the blank and then mount in between centers. Turn it slowly and with a parting tool ‘mark’ the circle on one face. Then use the bandsaw to cut away the excess.

Wax on the lathe and then oil afterwards.

-- "Do it right the first time, you'll just kick yourself later..."





3 comments so far

View a1Jim's profile

a1Jim

118095 posts in 4383 days


#1 posted 05-13-2010 02:46 AM

View donjoe's profile

donjoe

1360 posts in 3837 days


#2 posted 05-13-2010 02:48 AM

Cool tealights.

-- Donnie-- listen to the wood.

View WoodNuts's profile

WoodNuts

74 posts in 3754 days


#3 posted 05-14-2010 11:12 AM

Carefull, you might come home one night to a dark house with a trail of these from the kitchen (food) to the bedroom (?).

-- ...there's a fix fer dat...

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com