LumberJocks

Sailing wheel bowl!

  • Advertise with us
Project by Lupo posted 05-04-2010 07:33 PM 1794 views 0 times favorited 9 comments Add to Favorites Watch

This is a Poplar and Mahogany bowl. It is a piece that I am very proud of. I left it on display at work and it was dropped so there is a chip in it at the moment. ( insert sad face here )It will have to go back on the Lathe to be removed. The markets start up up soon so it needs to be fixed and i might make a few similar ones.





9 comments so far

View Joe Weaver's profile

Joe Weaver

518 posts in 4134 days


#1 posted 05-04-2010 07:41 PM

great looking bowl

-- Joe, Ga

View Jeff Dubofsky's profile

Jeff Dubofsky

52 posts in 3701 days


#2 posted 05-04-2010 07:49 PM

First time viewing your projects….to say you have an eye for creating beautiful and unique turnings would be an understatement! Really enjoy your work!

-- jdubo, Hartland Wisconsin..."If you see a flaw in my work take a (big) step back!"

View Jim Jakosh's profile

Jim Jakosh

22995 posts in 3553 days


#3 posted 05-04-2010 11:21 PM

Very nice bowl!

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View Jonathan's profile

Jonathan

2609 posts in 3498 days


#4 posted 05-05-2010 12:23 AM

Lupo,

Wow, that is classy! Great work. Good luck with the repair and I hope you’re able to make a few similar ones in time for the market.

How big is this bowl?

-- Jonathan, Denver, CO "Constructive criticism is welcome and valued as it gives me new perspectives and helps me to advance as a woodworker."

View Sam Shakouri's profile

Sam Shakouri

1200 posts in 3536 days


#5 posted 05-05-2010 02:13 AM

Lupo, It looks very nice bowl and you have good name for this project, but, for sincerely judgement, you can make it better next time. The rays do not meet properly in the centre. I mean, if you put this one in a competiton, the judges will react negative for such things you may think it is un-notceable.

-- Sam Shakouri / CREATING WONDERS WITH WOOD.....Sydney,Australia....

View lew's profile

lew

12821 posts in 4203 days


#6 posted 05-05-2010 04:19 AM

Don’t you just hate it when something like that happens to one of your projects- even worse when you do it your self.

Nice shape to the bowl.

Lew

-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.

View scrappy's profile

scrappy

3507 posts in 3878 days


#7 posted 05-05-2010 08:50 AM

Great bowl. I like that the inside rays are off set to the center of the outer rays. Great job. Your work is stunning as usual.

Keep it up.

Scrappy

-- Scrap Wood's the best...the projects are smaller, and so is the mess!

View Sam Shakouri's profile

Sam Shakouri

1200 posts in 3536 days


#8 posted 05-05-2010 09:00 AM

Lew, if you mean my comment, of course I do. AND I will be thankfull if someone draw my attention to it, so I dont repeat the same mistake. I DONT MIND CRITICISM AT ALL.

-- Sam Shakouri / CREATING WONDERS WITH WOOD.....Sydney,Australia....

View Lupo's profile

Lupo

206 posts in 3471 days


#9 posted 05-07-2010 03:11 PM

Sam I always accept the Comments! You are Right I could have done it better! I believe Lew is speaking about the Bowl being Chipped when I left it at work.

It is 8” in diameter~!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com