Wine Cabinet

Nicely done! How did you assemble your face frames, with pocket screws or dowel or biscuits?

Nice cabinet for a restricted space.

Here is a tip for making the cut out’s for the wine bottles: If your finished piece is to be 1-1/2” wide, start with a 3” board and drill holes with a forsner bit, then rip the board down the middle and wholla! you have two bottle shelves.

-- Grumpy old guy, and lookin' good Doin' it. ... Surprise Az.

face frames and pretty much everything I make are pockethole joinery.
As to the holes for wine, yes, I had run across that and tried it, but my hole saw was too small and I was to cheap to buy a bigger one, so instead took a lot of time with the jigsaw and sander.

-- SoCalWoodGal http://brittanyjoyner.com/Woodworking.html; https://skl.sh/34FSP5A

You have been quite busy. Everything you’ve shown today is very good.

-- Bruce - Indiana - Sawdust is just, MAN GLITTER!

Nice idea! Good wine and good book are always very good combination.

-- Ivan, Croatia, Wooddicted