Project by cso | posted 02-19-2017 11:14 PM | 1806 views | 0 times favorited | 7 comments | ![]() |
![]() |
This is made from Walnut and Walnut plywood. Used Euro hinges for the doors. I originally wanted to miter the corners, but I decided I wanted to have a large rounded edge. I am overall satisfied with the results, but working with plywood with solid walnut can be a challenge at times. If you have any questions, please ask. I don’t have any plans, but I can provide dimensions if you need.
7 comments so far
CB_Cohick
home | projects | blog
493 posts in 2256 days
#1 posted 02-20-2017 03:00 PM
That turned out great. I like the legs centered like that. What kind of finish did you use? Thanks for sharing.
-- Chris - Would work, but I'm too busy reading about woodwork.
cso
home | projects | blog
82 posts in 3693 days
#2 posted 02-20-2017 03:10 PM
Used Arm R Seal satin. General Finishes brand. Wipe on. Always had good results with it.
000
home | projects | blog
2859 posts in 1905 days
#3 posted 02-20-2017 03:21 PM
Nice work.
I can appreciate that you selected grain and placement of grain on your doors and top.
It shows quality and mentality of the build.
dannmarks
home | projects | blog
1025 posts in 1587 days
#4 posted 02-20-2017 05:36 PM
Very handsome sir.
000
home | projects | blog
2859 posts in 1905 days
#5 posted 02-20-2017 06:50 PM
Definitely deserving of a Top 3
Being a fellow cabinet maker, I understand the expertise it takes to make the rounded corners,
then to flush up all the veneer with the hardwood without sanding thru the so-thin veneer.
Your reveals around the doors are perfect.
(I give you a top 3)
cso
home | projects | blog
82 posts in 3693 days
#6 posted 02-20-2017 08:03 PM
Thanks for your comments… I appreciate it.
CausticGuy
home | projects | blog
17 posts in 1525 days
#7 posted 02-26-2017 12:31 AM
Very nice. I like the design.
Have your say...