Project by DocsDesigns | posted 01-18-2017 06:51 PM | 1358 views | 0 times favorited | 0 comments | ![]() |
![]() |
This pedalboard was commissioned for a guitarist friend of mine. It is constructed of walnut, with a 1/2 birch plywood surface that is captured via stopped dadoes. The pyramid walnut plugs were added for decoration along with the custom logo. The outside is 2” thick at the front and 1” thick on the sides and base, all four sides are connected using mortise/tenon joinery via a Festool Domino. Also a final touch was added for the technophiles, an angled dado on the front that can act as a cradle for a smartphone or tablet. Overall dimensions were 23” x 15” x 1.5”.
The finish was a 2-part process, consisting of GF Top Coat (Satin) and paste wax. Needless to say this will make a nice impression on any stage!
0 comments so far
Have your say...