Project by Tugboater78 | posted 01-13-2017 06:12 PM | 2500 views | 5 times favorited | 6 comments | ![]() |
![]() |
Built this a while back, just getting around to posting.
Small shop demands compact design. Though i have ideas to improve this a bit more, it has served me well since i built it 4-5 months ago. I took ideas from a collab video by April Wilkerson and Jay Bates, as they built an outfeed table for Nick Ferry here, which was a similar style The Wood Whisperer used in a couple videos.
Top is 32”x 38”, 2 layers of MDF covered by hardboard, banded in Oak.
All hardware used was salvaged from “Ikea” furniture i found on the curb, which i salvage quite regularly.
One side currently houses my pancake compressor, with accessories, in a drawer above, with a small area for Viewtainers holding some of my most commonly used screws/nails.
Other exposed side has a bank of four small drawers:
Top drawer has gluing supplies
Second has “joinery” stuff
Third is currently miscelanous
Bottom drawer is router accessories
Thanks for looking.
-- "....put that handsaw to work and make it earn its keep. - summerfi" <==< JuStiN >==>=->
6 comments so far
luv2learn
home | projects | blog
3112 posts in 3353 days
#1 posted 01-13-2017 06:27 PM
Love that you made your outfeed table multi-purpose. Nicely done.
-- Lee - Northern idaho~"If the women don't find you handsome, at least they ought to find you handy"~ Red Green
Mr M's Woodshop
home | projects | blog
426 posts in 4118 days
#2 posted 01-13-2017 08:03 PM
Nicely done.
I’m also a small shop survivor, and very much appreciate the multi-tasking you’ve created in your cabinet. Good stuff!
-- Henry Mowry, Santa Clarita, CA, http://www.MowryJournal.com
jayseedub
home | projects | blog
191 posts in 3016 days
#3 posted 01-13-2017 08:34 PM
Very nice design—looks like “real” furniture! And I love that the air compressor is in there.
It does provide me an opportunity to put a comment in about a birthday gift I received last year of a California Air Tools air compressor. It is so nice and quiet, you wouldn’t believe it. A solid little hummmmmm and then it’s done.
I don’t mean to detract from the great work you’ve done—just wanted to plug a great product that doesn’t demand to be stored in a cabinet because of the noise!
helluvawreck
home | projects | blog
32122 posts in 3917 days
#4 posted 01-13-2017 09:46 PM
This is a wonderful out feed table with plenty of nice storage. It’s a great addition to your shop.
helluvawreck aka Charles
http://woodworkingexpo.wordpress.com
-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com
dannmarks
home | projects | blog
1025 posts in 1632 days
#5 posted 01-14-2017 01:36 PM
Works well for you. Clean storage is always good.
N2wood
home | projects | blog
22 posts in 1749 days
#6 posted 01-14-2017 04:17 PM
Very good design and craftsmanship. I need to get out of my chair and build a couple of these.
Have your say...