Router Fence

  • Advertise with us
Project by cFurnitureGuy posted 03-07-2010 11:37 PM 5705 views 12 times favorited 9 comments Add to Favorites Watch

Ive been pretty busy this week… added a miter track to my router extension on my R4511 table saw. I ended up buying the Rockler Router Fence back when it was on sale and finally got around to setting it up!

I used 2 of the Rockler fence clamps that i got for Xmas to attach the fence to my TS fence…. added some MDF spacers to gain clearance for the Dust Collection. This setup also allows me to use the MicroAdjustment Jig for my TS fence…

Overall i am pretty happy with this setup! it is simple and i can expand on it later if needed!

-- Justin, Savannah,Ga

9 comments so far

View Jeison's profile


968 posts in 4160 days

#1 posted 03-07-2010 11:42 PM


-- - Jei, Rockford IL - When in doubt, spray it with WD-40 and wrap it with duct tape. The details will attend to themselves.

View longgone's profile


5688 posts in 4361 days

#2 posted 03-07-2010 11:48 PM

your router table extension looks very good.That is one huge router plate..What kind is it?

View cFurnitureGuy's profile


145 posts in 4229 days

#3 posted 03-08-2010 12:04 AM

its a Jessem Router Lift from a Jet Xacta Microadjust TS that had the Jessem/Jet routertable extension…
i know its huge… not ur normal router plate!


-- Justin, Savannah,Ga

View charlie48's profile


248 posts in 4222 days

#4 posted 03-08-2010 12:11 AM

cool , very nice setup !!!!

-- Charlie............Only time will tell if it was time well spent.

View Ken90712's profile


17984 posts in 4241 days

#5 posted 03-09-2010 07:47 AM

I have one like this as well on the same saw, little differnt though… nice!!!!

-- Ken, "Everyday above ground is a good day!"

View bigike's profile


4057 posts in 4341 days

#6 posted 03-21-2010 02:28 AM

nice setup i want to get one of those router lifts but can’t seem to find one used so it looks as though i have to buy it new, anyway thanks for the post

-- Ike, Big Daddies Woodshop, http://[email protected]

View falegniam's profile


335 posts in 4005 days

#7 posted 05-12-2010 01:16 AM

Very nice router table. I have the same tablesaw, and I’m wondering it you removed the right side granite extension, or did you add to it?

-- If you work you eat - If you don't work, you eat, drink, and sleep.

View cFurnitureGuy's profile


145 posts in 4229 days

#8 posted 05-12-2010 10:07 PM

thanks for the nice comments! falegniam… i didnt remove any of the granite just added to it… here are the other links my TS additions.:
storage extension
Router Table
Cross Cut Sled

let me know if there are any questions!

-- Justin, Savannah,Ga

View James E McIntyre's profile

James E McIntyre

1188 posts in 2345 days

#9 posted 05-14-2019 04:36 AM

Great router table! Besides being clamped to your fence is it screwedor clamped to you extinction table?
Does it put stress or distort your fence?

-- James E McIntyre

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics