jewelry boxes

  • Advertise with us
Project by david38 posted 12-15-2016 05:22 PM 1897 views 4 times favorited 18 comments Add to Favorites Watch

for daughter in-law, grand daughters, great grand daughters,made from all different woods

18 comments so far

View LittleCobra's profile


51 posts in 1461 days

#1 posted 12-15-2016 05:32 PM

Beautiful !

View ptofimpact's profile


389 posts in 2796 days

#2 posted 12-15-2016 05:46 PM

Gorgeous , wonderful work~

-- Pete in NC

View observer100's profile


431 posts in 1590 days

#3 posted 12-15-2016 07:44 PM

Super nice looking boxes!

View splintergroup's profile


2825 posts in 1702 days

#4 posted 12-15-2016 07:47 PM

Those lids are mesmerizing, nice work (and mass production attitude!)

View Northwest29's profile


1678 posts in 2970 days

#5 posted 12-15-2016 07:52 PM

All beautiful! The ladies should be thrilled, hope you signed them.

-- Ron, Eugene, OR, "Curiosity is a terrible thing to waste."

View Bud_3's profile


901 posts in 1703 days

#6 posted 12-15-2016 08:43 PM

Looks great,i like all those combinations of wood!

-- Personality and character of a man is like wood,you must polish it to shine.....

View Bobsboxes's profile


1369 posts in 3143 days

#7 posted 12-15-2016 09:21 PM

Very nice wook, great gifts.

-- Bob in Montana. Kindness is the Language the blind can see and deaf can hear. - Mark Twain

View helluvawreck's profile


32086 posts in 3346 days

#8 posted 12-15-2016 10:16 PM

These are great jewelry boxes and will all make great gifts.

helluvawreck aka Charles

-- helluvawreck aka Charles,

View rtbrmb's profile


719 posts in 2868 days

#9 posted 12-15-2016 11:01 PM

Great use of some beautiful wood.

Thanks for sharing.

Bill in MI

View Boxguy's profile


2846 posts in 2747 days

#10 posted 12-16-2016 01:37 AM

Dave, nice work here. It is unusual to see end grain in a top. I like the look. Would you tell us about the process you used to make these tops? Is the inset top joined with a spline cut into both the top and the side? Are you worried about the wood holding together? I don’t like hardware on a box if it can be avoided, but if you must use a metal catch this is a great choice. I like the sliding trays and the varied corner splines; those are nice touches.

Looks like you have been busy. To turn out 8 boxes is no mean feat. Mass production or not, it takes time to fit and install 128 splines. There are also lots of hinges to miter in and lots of trays to make and lots of tops to attach. Way to stick to the task. Keep boxing and keep posting.

-- Big Al in IN

View doubleDD's profile


8594 posts in 2522 days

#11 posted 12-16-2016 04:26 AM

These are beautiful boxes Dave. They look a lot like the one I’m building for my sister-in-law. Mine has a raised panel. I agree, the tops are outstanding. Well done, many times over.

-- Dave, Downers Grove, Il. -------- When you run out of ideas, start building your dreams.

View crowie's profile


3154 posts in 2430 days

#12 posted 12-16-2016 10:33 AM

G’Day David,
One can only admire those beautiful jewellery boxes…
The grain and figure of the timber with the mixture and selection is just superb!!
They will be treasured for years to come, such a lovely gift made with much love and care by a skilled craftsman..

-- Lifes good, Enjoy each new day...... Cheers from "On Top DownUnder" Crowie

View MontanaBob's profile


868 posts in 3163 days

#13 posted 12-16-2016 11:54 AM


View jeffswildwood's profile


4029 posts in 2457 days

#14 posted 12-16-2016 01:00 PM

Great job! These are truly amazing!

-- We all make mistakes, the trick is to fix it in a way that says "I meant to do that".

View david38's profile


3518 posts in 2823 days

#15 posted 12-16-2016 03:51 PM

thanks everyone for all the comments, box guy i just cut a grove and glued them on i hope they don’t move much . Most of the tops are just crotch wood from walnut.

showing 1 through 15 of 18 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics