| Project by Eric_S | posted 10-17-2016 12:58 AM | 2079 views | 4 times favorited | 3 comments |  |
 |
Needed a better clamp rack than the overpriced store bought metal I have that only holds 8 clamps. I haven’t even filled this up half way and it was completely made of scrap plywood I had. Used #10×2 1/2” screws and wood glue for fastening the holders.
This plan is from Jay Bates.
http://jayscustomcreations.com/2016/09/clamp-rack-version-2/
He has excellent videos on youtube, I highly recommend watching him if you haven’t yet.
This one measures 46” wide and the top rack is 12” deep, bottom is 10” deep.
-- - Eric Noblesville, IN
3 comments so far
lew
home | projects | blog
13332 posts in 4810 days
#1 posted 10-17-2016 02:05 AM
Nicely Done, Eric!
I like how you stack the clamps rather than a long row.
-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.
Roger
home | projects | blog
21054 posts in 3858 days
#2 posted 10-17-2016 12:11 PM
It is a nice design
-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed. [email protected]
Holbs
home | projects | blog
2378 posts in 3084 days
#3 posted 10-22-2016 03:26 AM
organization is key to any shop. keep up the work!
-- The Carpenter Bee is derived from the Ancient Greek word wood-cutter "xylokopos/ξυλοκὀπος"
Have your say...