Halloween CNC Wall Art

  • Advertise with us
Project by Davethewoodworker posted 10-15-2016 02:53 AM 1998 views 2 times favorited 2 comments Add to Favorites Watch

I made a Art project for Halloween on the X-Carve CNC. I imported a picture into Vectric Aspire, traced it and made a pocket cutout using 1/4” and 1/8” Endmills. Then painted with Black, White and Green craft paint, and stain the other parts with Minwax Purtain Pine stain. After that dried, I sprayed a coat of Matte Clear.

Thanks for checking it out and I hope everybody has a great HALLOWEEN

If you like to see the video, check it out HERE

-- Dave the Woodworker

2 comments so far

View CaptainSkully's profile


1615 posts in 5010 days

#1 posted 10-15-2016 04:05 PM

Dave, this is awesome! Would you mind posting it on Inventables as a project? I’d love to do a remake. Thanks!

-- You can't control the wind, but you can trim your sails

View SteveMI's profile


1175 posts in 4746 days

#2 posted 10-16-2016 01:33 AM

It is actually pretty straight forward after seeing behind the curtain. Looks great!
Further amazement in my world is that it is done this far ahead of the holiday. I’d be cutting the night before.


-- Being sawdust or first surface awe are dependent on the tool kerf

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics