Project by Canon | posted 10-14-2016 11:26 AM | 1125 views | 5 times favorited | 3 comments | ![]() |
![]() |
Doing some research on you tube for bending wood to make a cheese and board out of bent wood and came across this concept. It’s pretty cool to do and easy. Glue up is tricky. Going to work on two other designs over the weekend that I will share. This a great gift for anyone and for the holidays. Made from maple and cherry laminated boards first. The riped to 1/16 of inch and pressed between a 2×6 form.
3 comments so far
KnotCurser
home | projects | blog
2040 posts in 4563 days
#1 posted 10-14-2016 12:52 PM
Looks awesome!
This is Steve’s plans, from WWMM, right?
http://woodworking.formeremortals.net/2013/07/make-a-bent-wood-photo-display-stand/
Thanks for sharing!
-bob
-- Robert Rhoades WoodWorks / Email: [email protected] / www.rhoadesclan.com
Canon
home | projects | blog
78 posts in 2444 days
#2 posted 10-14-2016 01:06 PM
Hi Robert thanks. Yea saw this on his you tube but his use of pegs to bend did not show consistent glue pressure. So I used a form to give equal pressure
KnotCurser
home | projects | blog
2040 posts in 4563 days
#3 posted 10-14-2016 01:10 PM
That’s a great tip – thanks!
-bob
-- Robert Rhoades WoodWorks / Email: [email protected] / www.rhoadesclan.com
Have your say...