Project by joshgenz | posted 09-10-2016 07:27 PM | 66708 views | 14 times favorited | 11 comments | ![]() |
![]() |
| |||||||
|
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
11 comments so far
MinnesotaHack
home | projects | blog
25 posts in 1953 days
#1 posted 09-10-2016 08:58 PM
I like it. Wish I had floor space and could get my grinder off the crowded bench.
Is the top big enough to prevent stepping on the base when walking up to the grinder?
joshgenz
home | projects | blog
10 posts in 3666 days
#2 posted 09-10-2016 09:07 PM
The top and the bottom are the same size, but there isn’t an issue of hitting the base when using the grinder. I wanted to keep the entire stand as small as possible without sacrificing stability.
jeff
home | projects | blog
1306 posts in 4515 days
#3 posted 09-11-2016 06:47 AM
nice stand…
-- Jeff,Tucson,Az.
Paul M
home | projects | blog
118 posts in 2353 days
#4 posted 09-13-2016 02:00 PM
I like it, what casters did you use? I assume they lock.
-- Paul M
joshgenz
home | projects | blog
10 posts in 3666 days
#5 posted 09-13-2016 02:15 PM
The casters were purchased from Home Depot. Both the wheel and the swivel locks on all four casters. I wasn’t convinced that the casters are necessary since the stand and grinder are not that heavy, but I am glad that I used casters since it makes it much easier to roll over to my lathe when I am working on a project, and then roll back to storage when I am done.
Paul M
home | projects | blog
118 posts in 2353 days
#6 posted 09-13-2016 04:10 PM
thanks
-- Paul M
thelt
home | projects | blog
671 posts in 4429 days
#7 posted 03-06-2017 12:33 PM
I really like it. Mine is on a stand that was given to me that is based on an old tire & rim with a piece of 1/4” square metal stock. The tire & rim take up too much floor space and I’m always kicking the tire when I use the grinder. Can you give me the dimensions for a cut list?
-- When asked what I did to make life worthwhile in my lifetime....I can respond with a great deal of pride and satisfaction, "I served a career in the United States Navy."
BigDClampit
home | projects | blog
16 posts in 1563 days
#8 posted 04-30-2017 11:58 PM
Josh,
I like your stand. I was going to mount mine on the workbench however I like your idea.
D-
-- We should take the time to woodwork. After all it is our time.
Alex_intihar2
home | projects | blog
1 post in 1436 days
#9 posted 05-05-2017 10:20 PM
What are the dimensions??
spookyeight
home | projects | blog
1 post in 1273 days
#10 posted 10-15-2017 09:40 PM
any dimensions?
Woodrooky
home | projects | blog
1 post in 1218 days
#11 posted 12-09-2017 05:38 PM
What are the dimensions of the top and bottom?
Have your say...