Cutting boards

  • Advertise with us
Project by tntro posted 05-23-2016 03:08 PM 1458 views 1 time favorited 10 comments Add to Favorites Watch

Here are a set of cutting board I made for my niece they are made out of hard maple and Ebony as the handle and Ebony as the plugs

-- dale

10 comments so far

View Mark's profile


1075 posts in 3212 days

#1 posted 05-23-2016 03:50 PM

Very nice Dale. I like your design.

-- Mark

View redsox9's profile


105 posts in 3524 days

#2 posted 05-23-2016 04:06 PM

That’s gorgeous, Dale, nice work!

-- Jeff, North Andover, MA

View Steve Cherry's profile

Steve Cherry

201 posts in 3069 days

#3 posted 05-23-2016 06:33 PM

Very nice Dale. I really like the ebony. I made the same ones a few years ago for my wife for Christmas. Mine turned out ok except for the juice groove on the larger one – the router slipped off of the pattern once – wife still like it though. I used cherry for the handle. Thanks for posting, keep up the good work.

-- Steve - Front Royal, VA

View JimRochester's profile


576 posts in 2852 days

#4 posted 05-23-2016 08:15 PM

Very nice job. I also made a set of these with the cherry handles. Yours are nicer. I had some tearout when I drilled the holes for the plugs which I was never able to repair to my satisfaction.

-- Schooled in the advanced art of sawdust and woodchip manufacturing.

View mikeacg's profile


2036 posts in 2295 days

#5 posted 05-24-2016 12:07 PM

Well done and great design! I may have to play with that concept a bit…

-- Mike, A Yooper with a drawl,

View helluvawreck's profile


32122 posts in 4105 days

#6 posted 05-24-2016 02:07 PM

These are very nice boards and the design is so attractive.

helluvawreck aka Charles

-- helluvawreck aka Charles,

View Ivan's profile


16999 posts in 4105 days

#7 posted 05-24-2016 05:21 PM

Beautiful design and wood colours. I like those dovels in black.

-- Ivan, Croatia, Wooddicted

View CFrye's profile


11357 posts in 3078 days

#8 posted 05-26-2016 11:21 AM

Beautiful, Dale. Are the plugs functional or decorative? Which direction does the ebony grain run and how is it secured to the maple? Is the large board the only one to have the juice groove, or are the others turned upside down? Thanks for sharing.

-- God bless, Candy

View JimRochester's profile


576 posts in 2852 days

#9 posted 05-27-2016 01:26 AM

I did this project so I can answer. These are from December 2007 Woodsmith. I guess you would consider them functional since they do go through the handles and the accent piece at the bottom. The large one is the only one to have a juice groove.

-- Schooled in the advanced art of sawdust and woodchip manufacturing.

View tntro's profile


73 posts in 2800 days

#10 posted 05-27-2016 01:30 AM

Sorry for taking so long to get back to everybody about the comments and question you had about them thank you Jim for answering that question for everybody and it’s just been a hectic week thank you everybody for liking them all I’m hoping to build some more maybe just use different wood next time

-- dale

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics