LumberJocks

32 Lincoln kb

  • Advertise with us
Project by htl posted 05-23-2016 11:41 AM 3396 views 1 time favorited 37 comments Add to Favorites Watch

Had a lot a fun building this 32 Lincoll.
I never had tried a car with a side board which was quite interesting to master.
Here’s the blog on it’s build.
http://lumberjocks.com/htl/blog/85794

The making of the wheels was also quite challenging and a lot a work.

-- An Index Of My Model making Blogs https://www.lumberjocks.com/htl/blog/130264





37 comments so far

View crowie's profile

crowie

3372 posts in 2561 days


#1 posted 05-23-2016 11:51 AM

Now that is one sweet ride Bruce….

The wheels look excellent sir and the lines in the model is superb…top job..who wouldn’t have wanted one back in the day….

-- Lifes good, Enjoy each new day...... Cheers from "On Top DownUnder" Crowie

View LittleBlackDuck's profile

LittleBlackDuck

3492 posts in 1431 days


#2 posted 05-23-2016 11:58 AM

Nice fender bender..

-- If your first cut is too short... Take the second cut from the longer end... LBD

View htl's profile

htl

4872 posts in 1769 days


#3 posted 05-23-2016 12:31 PM

Your right crowie but I want the butler to go with it to keep all them spokes clean on them dirt roads.
Now a days I wouldn’t buy a motor cycle with spoke wheels for that and other reasons, just don’t want the up keep.
Thanks Ducky but there was no bending of fenders in this build as you know.

-- An Index Of My Model making Blogs https://www.lumberjocks.com/htl/blog/130264

View Dutchy's profile

Dutchy

3508 posts in 2778 days


#4 posted 05-23-2016 12:33 PM

What did I heard tracks in the trunk?

Very nice Bruce. Well done. I enjoyed also the building blogs.

-- https://dutchypatterns.com/

View Dee1's profile

Dee1

337 posts in 2499 days


#5 posted 05-23-2016 01:00 PM

Very nice outstanding spokes.
Dee1

View johnstoneb's profile

johnstoneb

3131 posts in 2783 days


#6 posted 05-23-2016 01:23 PM

You have raised the bar again. Those wheels are great. Outstanding look on the fender running boards. I enjoyed your blog.

-- Bruce, Boise, ID

View LittleBlackDuck's profile

LittleBlackDuck

3492 posts in 1431 days


#7 posted 05-23-2016 01:23 PM

Thanks for the support Dutchy… We’ll get htl to make those TRACKS yet.

-- If your first cut is too short... Take the second cut from the longer end... LBD

View a1Jim's profile

a1Jim

117909 posts in 4187 days


#8 posted 05-23-2016 01:47 PM

Very nice work,looks great.

-- https://www.artisticwoodstudio.com/videos

View helluvawreck's profile

helluvawreck

32086 posts in 3476 days


#9 posted 05-23-2016 04:13 PM

This is a beautiful miniature. Nice work.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com

View Ivan's profile

Ivan

15499 posts in 3477 days


#10 posted 05-23-2016 04:18 PM

Awesome car,awesome wheels! I would like to se more details on it, lights,door openers,etc.

-- Ivan, Croatia, Wooddicted

View ralbuck's profile

ralbuck

6316 posts in 2876 days


#11 posted 05-23-2016 04:42 PM

Marvelous!

-- Wood rescue is good for the environment and me! just rjR

View htl's profile

htl

4872 posts in 1769 days


#12 posted 05-23-2016 06:13 PM

majuvia for some reason once I get to the point where it’s time for the little stuff I’m ready to move on to the next project.

Part of it is that it’s the build for me once I see I can do some thing it’s time to move on.
I’m not a protectionist I have no need to get it done to that point my nerves won’t put up with it..

The only thing I will do different on the truck build is use oak or some real wood dowels for the spokes the tooth picks show up really white in pictures.

-- An Index Of My Model making Blogs https://www.lumberjocks.com/htl/blog/130264

View htl's profile

htl

4872 posts in 1769 days


#13 posted 05-23-2016 06:22 PM

Ducky and Dutchy I was looking at train bridges yesterday and if I could find just the right one to make some shelves for my train I might make some tracks.
Show me a cool bridge and tracks will be delivered “maybe”.

-- An Index Of My Model making Blogs https://www.lumberjocks.com/htl/blog/130264

View rtbrmb's profile

rtbrmb

720 posts in 2998 days


#14 posted 05-23-2016 08:46 PM

Great miniature. The custom wheels are such a nice touch – very creative and well executed.

Thanks for sharing.

Bill in MI

View Dutchy's profile

Dutchy

3508 posts in 2778 days


#15 posted 05-23-2016 08:49 PM

showing 1 through 15 of 37 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com