Maple banjo holder

  • Advertise with us
Project by 2jacobmiller posted 05-15-2016 09:52 PM 833 views 0 times favorited 1 comment Add to Favorites Watch

I made this banjo holder for my mom, who some what recently picked up that instrument.
It’s made out of maple, a small piece of purplehheart , and some brass rod. Finished with 3 coats of Min Minwax tung oil finish.
It separates into three pieces for shipping. Added the piece of purplehheart at the joint in the upright to help disguise the joint. I used 8mm domino’s to join the upright and pinned those with 2mm brass rod.
I based this design on the take a stand products, some LJ posts, and some instructables.

Suggestions are always welcome.
Thanks for looking, cheers.

-- Jacob, Hawaii

1 comment so far

View Brinth's profile


71 posts in 1435 days

#1 posted 05-16-2016 07:18 AM

You can easely make the Black holder in Wood to.
I have done it for 6 wall hangers for instruments. (violin, banjoulele, 4x guitars)

-- Brinth, Denmark - "nothing is impossible and everything goes; if you have the will (and the time) to do it"

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics