Charging Station

  • Advertise with us
Project by tchara posted 05-14-2016 04:27 PM 1230 views 0 times favorited 1 comment Add to Favorites Watch

This was a quick evening project to fight off boredom. When I built this workbench, i had intentions of using it for a out feed for the Table saw. However I ended up mounting my drill chargers on the side of the table, so I always had to keep the saw away from the table, so I could get to the chargers. I just never found an ideal place to mount them, that I liked…...until this epiphany. I already had the shelving installed in the bench, so it was just a matter of attaching a door to the shelf with a piano hinge, and mounting the chargers on the door. I have a door magnet attached that keeps it closed.

I have a 4ft power strip attached to the bench, so I can plug them in right above them. The only puzzle I haven’t solved is how to keep the access power cord out of the way.

I like to refer to these as mini projects…..but still fun!

1 comment so far

View fivecodys's profile


1773 posts in 3135 days

#1 posted 05-16-2016 05:52 PM

Hey! I like that. I just built one myself.
It’s’ one of those things that you put off and once you build it you wonder why you didn’t do it sooner!

-- A bad day woodworking is still better than a good day working.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics