Computer Desk

  • Advertise with us
Project by TDSpade posted 05-01-2016 07:36 AM 1548 views 2 times favorited 2 comments Add to Favorites Watch

Top is 62 inches wide by 26 inches deep, baltic birch plywood topped with Wilson art plastic laminate hunter green. Trimmed with quarter sawn white oak one and a quarter inches wide. Half lap miters on the corners. 45 degree bevel all the way around. Pull out tray is 42 inches wide by 15 deep baltic birch plywood topped with Wilson art plastic laminate hunter green. With only the front trimmed with quarter sawn white oak. Legs and back rails are red oak. End rails and slats are quarter sawn white oak. Desk is 31 inches high

Mortise and tenon joints used for all rails and slats. Pocket screws to attach top.

Finnish is 3 parts General finishes black cherry water base stain mixed with 4 parts General finishes brown mahogany water base stain. Followed with zinsser sealcoat shellac, topped with lacquer.

-- For every expert, there is an equal and opposite expert.

2 comments so far

View gsimon's profile


1320 posts in 2998 days

#1 posted 05-01-2016 01:42 PM

I really like this table – great mix of old and new

-- Greg Simon

View helluvawreck's profile


32122 posts in 3751 days

#2 posted 05-01-2016 06:54 PM

You did a very nice job on this computer desk.

helluvawreck aka Charles

-- helluvawreck aka Charles,

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics