Project by Gary Lundgren | posted 04-28-2016 02:47 AM | 2636 views | 4 times favorited | 8 comments | ![]() |
![]() |
| |||||||
|
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
8 comments so far
BurlyBob
home | projects | blog
8464 posts in 3270 days
#1 posted 04-28-2016 02:50 AM
That is a really nice set up. I like the added drawers.
Jason Martin
home | projects | blog
18 posts in 1784 days
#2 posted 04-28-2016 02:31 PM
I like the set up. What at the dimensions of the drawer if you don’t mind me asking.
-- Jason Martin
Gary Lundgren
home | projects | blog
81 posts in 2497 days
#3 posted 04-28-2016 03:22 PM
Thank you.
Drawer inside dimensions is 10 wide x 27-1/4 long x 2-3/4 deep. Made of 1/2 material. Drawer fron is attached to cover front. (Double sided tape was just to hold front in place while I got it screwed to front of drawer. I have to remove the excess tape yet.)
-- GaryLundgrenCrafts
Jason Martin
home | projects | blog
18 posts in 1784 days
#4 posted 04-28-2016 10:02 PM
Thanks for the drawer dimensions I think that you might have helped me decide what to give a couple of my friends for Christmas.
-- Jason Martin
SheriDi
home | projects | blog
147 posts in 4308 days
#5 posted 04-29-2016 12:28 AM
That’s a great idea. Think I’ll be making a couple for Christmas this year.
-- A Veteran is someone who, at one point in their life, wrote a blank check payable to the United States of America for an amount up to and including their life. That is beyond honor
Gary Lundgren
home | projects | blog
81 posts in 2497 days
#6 posted 04-29-2016 01:07 AM
Thanks all.
The drawer just slides in. I didn’t use any slides or hardware. Just waxed up bottom edges with paraffin wax. Drawer bottom is in dado’s all around so is about 1/4 higher than drawer edges. Works good.
-- GaryLundgrenCrafts
sheetzy
home | projects | blog
177 posts in 3164 days
#7 posted 05-01-2016 12:24 PM
I’M LIKEN IT. THAT WOULD LOOK NICE ON MY GUN SAFE
-- What this world needs is a little more sawdust on the floor.
helluvawreck
home | projects | blog
32122 posts in 3871 days
#8 posted 05-01-2016 06:56 PM
That’s a very nice stand.
helluvawreck aka Charles
http://woodworkingexpo.wordpress.com
-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com
Have your say...