Project by Texcaster | posted 04-10-2016 02:10 AM | 3074 views | 7 times favorited | 5 comments | ![]() |
![]() |
I can’t decide if this guitar stand is a long lost Shaker design or if it would come from the Ikea custom shop. If such a place existed, the guitar stand might be called Yngwie. Spruce with Red Cedar tenons.
My second flat top, an OM, it’s been strung up for six weeks and wants a final bit of polishing.
-- Mama calls me Texcaster but my real name is Mr. Earl.
5 comments so far
ChrisK
home | projects | blog
2051 posts in 4097 days
#1 posted 04-11-2016 12:51 PM
Nice design. The joinery looks good as well.
-- Chris K
David
home | projects | blog
78 posts in 3043 days
#2 posted 04-11-2016 01:56 PM
This is wonderful piece. Great joints. Is this your plan, if not where can i get the plans. I have a two folks in my worship team at church that I have been looking for guitar stand for them. Thanks for the post Great work
-- http://littleredshop.net "A man that works with his hands, knows his soul" " Have Fun, Go Fast, and Take Chances for Christ's Sake!!"
AnthonyReed
home | projects | blog
10164 posts in 3456 days
#3 posted 04-11-2016 05:20 PM
Clean design and the unassuming fantastic joinery. Love it Bill!
-- ~Tony
Texcaster
home | projects | blog
1293 posts in 2689 days
#4 posted 04-11-2016 09:09 PM
Cheers fellas, thanks for commenting.
David, yes my design and I don’t have plans. Make a cardboard pattern of a dreadnought and find your angles that way. The first one I just screwed together and adjusted here and there till it worked.
A note, smaller body guitars will sit closer to the floor. I’m going to raise the bottom pegs, in future, to allow for end pin jacks and straight leads. Be sure to post pics.
Les Paul size bodys
-- Mama calls me Texcaster but my real name is Mr. Earl.
Earache
home | projects | blog
37 posts in 2274 days
#5 posted 04-11-2016 09:18 PM
To be called the “Yngwie” , it’d have to be all beat up with the finish scuffed off in places.
I like it!
-- Eric - Black Hawk, Colorado
Have your say...