Project by ravensrock | posted 03-05-2016 12:45 AM | 2851 views | 4 times favorited | 5 comments | ![]() |
![]() |
Here is the workbench I built a few years back to replace the one in the last picture. It is made out of oak plywood and oak hardwood with a replaceable hardboard work surface and a Jorgensen vise. It has plenty of storage- 4 drawers and 4 doors with full pull-out shelves that house my Delta planer (soon to be replaced by a Dewalt!), Rigid sander, air compressor and other stuff. I am able to store other tools in the space underneath the bench top- cases for my electric drill, jig saw, rotary hammer, etc. It has served me well so far. Thanks for looking!
-- Dave, York, PA, Wildside Woodworking
5 comments so far
BurlyBob
home | projects | blog
8511 posts in 3279 days
#1 posted 03-05-2016 01:27 AM
Whoa, that’s a mighty fine looking work bench! You really done good on that one.
woodbutcherbynight
home | projects | blog
7850 posts in 3423 days
#2 posted 03-05-2016 02:48 AM
That is a nice looking workbench! Good work.
-- Live to tell the stories, they sound better that way.
jasonallen
home | projects | blog
202 posts in 2634 days
#3 posted 03-05-2016 02:50 AM
I like looking at work benches and thinking about how I would build mine. Until I remember that if I had a bigger work bench I would just cover all but 3 square feet of it with scraps, hardware, used rags, and stray tools. But yours sure looks nice.
-- Skill and confidence are an unconquered army.
ravensrock
home | projects | blog
513 posts in 2656 days
#4 posted 03-05-2016 03:26 AM
Thanks jasonallen. But believe me it sure doesn’t look that neat now!
-- Dave, York, PA, Wildside Woodworking
calisdad
home | projects | blog
334 posts in 2523 days
#5 posted 03-05-2016 04:16 PM
A lot of smart things going on there ravensrock. I like the undershelf- I’d keep my tools plugged in right there. And the pullout shelves save your back. btw- I just put new bearings in my Delta planer and it’s ready for 25 more years of abuse.
-- Groveland, CA.
Have your say...