Junghans 1910 Vienna Regulator clock restoration

  • Advertise with us
Project by jaguar1201 posted 02-29-2016 03:19 AM 1201 views 1 time favorited 3 comments Add to Favorites Watch
Junghans 1910 Vienna Regulator clock restoration
Junghans 1910 Vienna Regulator clock restoration No picture No picture No picture No picture No picture
Zoom Pictures

When my daughter gifted this fleamarket clock find to me, the case was missing several parts including the half columns on each side of the door, the finials on the bottom and the top pediment had to be replaced. The movement was non-working with at least 40+ years of dirt and grime on it, and the pendulum bob graphic was missing. It is a 1910 Junghans with an original celluoid (heavily crazed) dial face that I elected to keep, rather than replace. I made the missing pieces, glued and refinished the box section as well as the wormy walnut top and bottom pieces, and serviced the movement. It now hangs in my kitchen and keeps accurate time compared to my computer. This is the fourth vienna regulator style that I have had to restore.
Enrico Caruso

-- Enrico, Stow OHIO

3 comments so far

View BurlyBob's profile


9404 posts in 3550 days

#1 posted 02-29-2016 03:36 AM

That’s a very fine looking old clock.

View NDakota's profile


72 posts in 2831 days

#2 posted 02-29-2016 03:42 AM

That is VERY impressive! Nice job

View Mean_Dean's profile


7057 posts in 4432 days

#3 posted 03-01-2016 05:23 PM

That’s a great save of a beautiful old clock! I’m sure it’ll serve you well, now that it’s all fixed up in its new home!

-- Dean -- "Don't give up the ship -- fight her 'till she sinks!" Capt James Lawrence USN

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics