Walnut/Maple/Spalted Pecan Humidor

  • Advertise with us
Project by Cefarat1 posted 02-23-2016 07:01 PM 1459 views 2 times favorited 3 comments Add to Favorites Watch

This is a solid walnut and maple humidor with spalted pecan lining the top and bottom edges as well as on the inside edges of the lid. The joints are splined miter joints with 3/4” wall thickness. The tray and inside is lined with spanish cedar. The hinges are Soss brand and the knobs on the tray are solid brass. The handle on the front is solid aluminum and is attached with bolts from the inside. The finish is a mixture of equal parts polyurethane, tung oil, and BLO with paste wax applied afterwards. The humidity level will be maintained using Boveda humidity packs and a Hygrometer will be installed later. The humidor measures roughly 17” x 11” x 10” tall and will hold around 150 cigars. Thanks for looking!

3 comments so far

View Douger's profile


74 posts in 3602 days

#1 posted 02-23-2016 07:58 PM

Gorgeous! Nice work.

-- Doug, Kansas,

View jasonallen's profile


202 posts in 2537 days

#2 posted 02-23-2016 10:33 PM

I love it! Especially that pecan trim!

-- Skill and confidence are an unconquered army.

View helluvawreck's profile


32122 posts in 3783 days

#3 posted 02-24-2016 03:34 PM

This humidor turned out beautifully.

helluvawreck aka Charles

-- helluvawreck aka Charles,

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics