Corner Rabbeting/Key Cutting Jig

  • Advertise with us
Project by aschmidy2003 posted 09-04-2009 10:26 PM 2690 views 8 times favorited 6 comments Add to Favorites Watch
Corner Rabbeting/Key Cutting Jig
Corner Rabbeting/Key Cutting Jig No picture No picture No picture No picture No picture
Zoom Pictures

Fence saddle and hold down bar. Simple but very effective.

-- Psalm19:1

6 comments so far

View hootr's profile


183 posts in 3829 days

#1 posted 09-05-2009 12:30 PM

I need to add that hold down to mine.
I put a tall fence on the back side and it doubles for raised panels.
thanks for sharing

-- Ron, Missouri

View aschmidy2003's profile


49 posts in 3827 days

#2 posted 09-05-2009 04:44 PM

good thinking on the combination jig. I might have to redo mine.

-- Psalm19:1

View a1Jim's profile


117713 posts in 4059 days

#3 posted 09-07-2009 03:26 AM

Good Jig

View RexMcKinnon's profile


2593 posts in 3677 days

#4 posted 09-08-2009 06:37 PM

Most of the time simple is what is most effective.

-- If all you have is a hammer, everything looks like a nail!

View bigike's profile


4057 posts in 3771 days

#5 posted 11-26-2009 02:55 AM

what was used to thread the screw? nice jig though

-- Ike, Big Daddies Woodshop, http://[email protected]

View aschmidy2003's profile


49 posts in 3827 days

#6 posted 11-27-2009 04:24 AM

if you mean the screw for the hold down it is just a 5/16” carriage bolt.

-- Psalm19:1

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics