My second bandsaw box, a log or ???

  • Advertise with us
Project by Rosepedal27 posted 11-20-2015 02:21 AM 2565 views 3 times favorited 7 comments Add to Favorites Watch

My second bandsaw box. I had this log from a maple tree we cut down last year and I thought, hmmm, could I?
It was a little tricky because it was cut at an angle, but I like that so I cut one end a little bit straighter so I could work with it, but I still had to hold it straight up on one point while I cut the circle out. I still have all my fingers so it can be done. There was a knot in the middle, so when I was looking for what I would use for a knob, I decided to use the knot from the piece I cut off earlier; so I cut around the knot on my scroll saw and glued it on. It looks really cool. I left it all natural, inside and out. Now you could put it out by your wood pile and put an extra key in it and nobody would know!
I’m hooked!

7 comments so far

View Jim Jakosh's profile

Jim Jakosh

22869 posts in 3523 days

#1 posted 11-20-2015 02:27 AM

Way to go, Pattie! You should have many entries for the December meeting.

Cheers, Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View  woodshaver Tony C   's profile

woodshaver Tony C

6678 posts in 3770 days

#2 posted 11-20-2015 03:01 AM

Very nice! Your on a roll! Waiting for what’s next!

-- St Augustine FL, Experience is the sum of our mistakes!

View rossinator's profile


46 posts in 2056 days

#3 posted 11-20-2015 12:40 PM

Great way to hide things, good idea.

View Cliff 's profile


1494 posts in 2141 days

#4 posted 11-21-2015 01:31 AM

Just Beautiful…....very unique design,



-- Cliff Australia : Snoring is good. It blows away all the Sawdust.

View bushmaster's profile


3669 posts in 2700 days

#5 posted 12-13-2015 12:23 AM

Great idea but most likely I would forget and burn it.

-- Brian - Hazelton, British Columbia

View Druid's profile


2096 posts in 3213 days

#6 posted 11-14-2018 06:39 AM

An awkward project to accomplish with the angled ends, but you obviously did a really good job on this one.
What size blade were you using . . . ¼”, ½” ?
Nicely done.

-- John, British Columbia, Canada

View Rosepedal27's profile


40 posts in 1527 days

#7 posted 11-15-2018 07:08 AM

Thank you. 1/4”

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics