New clamp storage

  • Advertise with us
Project by ajthomas5009 posted 11-11-2015 01:41 AM 1768 views 1 time favorited 1 comment Add to Favorites Watch

I finally decided to add some much needed clamp storage to the shop. Previously I just had them all jammed in 3 paint buckets. I was always pulling out multiple clamps, had clamps lying all over the place and it literally made me frustrated / depressed.

Since Most of my clamps were 3/4” pipe I started there. I modified the plans on the Concord Carpenters website to be slightly beefier and hold more clamps. I had planned on making custom racks for each style of clamp but realized the pipe racks worked for most clamps and scrapped the custom rack idea. For my F-clamps a simple (2×4) screwed to the studs made the mosr sense to me. The quick clamps ended up getting slid over a 2×4 as well. So now all my clamps are neat and easily accessible. None of the storage solutions are ground breaking but they were relatively simple and worked quite well.

I can’t believe I waited this long to organize my clamps.

-- Sometimes you're flush and sometimes you're bust, and when you're up, it's never as good as it seems, and when you're down, you never think you'll be up again, but life goes on.

1 comment so far

View Hawaiilad's profile


3378 posts in 4071 days

#1 posted 11-11-2015 04:37 AM

Well, you shouldn’t be depressed with that set up. I have the same problem. I have them hung up, but all over the place. I need to keep them in one place like you have. Thanks for sharing

-- Larry in Hawaii,

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics