LumberJocks Woodworking Forum banner

Project Information

Serving tray made from walnut. 14 inch outside diameter, and the inside diameter is about 12 inches. Used a router to cut the outside shape, and to get a good crisp edge on the inside, the. Removed most of the waste at the drill press with a large forstner bit. Took a LOT of sanding.

Finish is several coats of gloss Arm R Seal.

Comments, questions, and critique are always welcome. Thanks for looking.

Gallery

Comments

· Registered
Joined
·
1 Posts
what a great job and the walnut looks amazing!
 
Top