Cutting board

  • Advertise with us
Project by JLay posted 10-08-2015 05:36 PM 1115 views 0 times favorited 1 comment Add to Favorites Watch

This is a cutting board I made in woodworking. I used oak and walnut to complete this project. The main body of the board consists of edge gluing, but the top and bottom pieces were glued to the top of the grain with their edges. Once the middle was assembled, the top pieces would be planed down with the body and when they were both a good size I glued it all together. Lastly I cut the end pieces and sanded them to be round and used the router to round the corners and edges off.

1 comment so far

View cannondale's profile


54 posts in 3842 days

#1 posted 10-24-2015 07:56 AM

Nice job. Thanks for sharing.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics