Segmented French Rolling Pins

  • Advertise with us
Project by JoeinDE posted 09-24-2015 02:06 PM 1565 views 1 time favorited 1 comment Add to Favorites Watch

I had a decently thick piece of material as the waste cut-off from a big-block butcher block that I decided to turn down to a cylinder on my lathe and turn into a rolling pin. I posted that in my Etsy shop and someone liked the look of the piece, but wanted one that was longer. The original – shown in the last two pics – was cherry, walnut and mahogany. The larger one is cherry, walnut and hickory. The larger one is 17” long and 2.25” diameter. The smaller one is 10” diameter and 1.75” diameter. Both are finished with butcher block finish and buffed to a high sheen with a buffing wheel.


1 comment so far

View wiser1934's profile


530 posts in 4642 days

#1 posted 09-25-2015 02:47 AM

very nice work, joe. i like the stripe effect. thanks for posting

-- wiser1934, new york

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics