LumberJocks

Growler Tote

  • Advertise with us
Project by Green_Hornut posted 09-21-2015 04:38 PM 1636 views 9 times favorited 7 comments Add to Favorites Watch

Growler Tote for a friend. 1/4 sawn red oak with Watco Medium Walnut oil finish. Then 5-6 coats of a wipe on mixture of 50% poly semi gloss and 50% mineral spirits. Wipe on, wipe off with a dry rag. Knock it down with 0000 steel wool or 400 grit wet dry sandpaper between coats. The carving was done with my CNC. The beer mug was antique white and a pickeling stain.

Kind of made it up as I went along, no plan to follow. Thanks to a number of LJ’s out there for design ideas. When I saw something I liked I shamelessly copied it in the design.

Going to give it to a friend who home brews and his label is 16th Fairway since he lives on a golf course. My hope of course is after I give it to him the next time he comes over he has it along with full growlers ;-)

-- Mother Nature always bats last.





7 comments so far

View ChrisK's profile

ChrisK

2037 posts in 3595 days


#1 posted 09-22-2015 11:48 AM

Beautiful work. And how true.

-- Chris K

View DIYaholic's profile

DIYaholic

19862 posts in 3188 days


#2 posted 09-22-2015 12:04 PM

Nicely done. Looks fantastic.

I’m jealous, of your CNC….
and your future growler acquisition!!!

-- Randy-- I may not be good...but I am slow! If good things come to those who wait.... Why is procrastination a bad thing?

View helluvawreck's profile

helluvawreck

32086 posts in 3380 days


#3 posted 09-22-2015 12:43 PM

It’s very nice and will make a great gift.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com

View NormG's profile

NormG

6480 posts in 3517 days


#4 posted 09-23-2015 03:04 AM

Wonderfully done, thank you for sharing

-- Norman - I never never make a mistake, I just change the design.

View albachippie's profile

albachippie

773 posts in 3549 days


#5 posted 09-23-2015 03:19 PM

Great work, simple design but very effective,

Well done,
Garry

-- Garry fae Bonnie Scotland

View peteski's profile

peteski

1 post in 260 days


#6 posted 02-04-2019 06:57 PM

Where can I get plans for this project?

View Green_Hornut's profile

Green_Hornut

164 posts in 3133 days


#7 posted 02-07-2019 08:39 PM

There are no plans. I kind of made it up as I went. Start out with the dimensions of a growler and worked from there. Looked at pictures on line for general layout and shapes. The CNC stuff was made by me.

-- Mother Nature always bats last.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com