LumberJocks

Inspired stripes.

  • Advertise with us
Project by degoose posted 06-23-2009 12:22 PM 2849 views 3 times favorited 18 comments Add to Favorites Watch

Had a few beers and was inspired.
So many timbers I can’t remember them all, well some of them,, PH, SA, Meranti, Myrtle and NGR I think, so call me a liar If I am wrong. Oh and the outside pieces are Crows Ash! And dont forget the PH,, oh I said that already hey,

-- Don't drink and use power tools @ lasercreationsbylarry.com.au





18 comments so far

View stefang's profile

stefang

16740 posts in 3843 days


#1 posted 06-23-2009 12:48 PM

Nice job Larry. If I used beer for inspiration there would probably be some fingers glued up in there with the wood.

-- Mike, an American living in Norway.

View moshel's profile

moshel

865 posts in 4193 days


#2 posted 06-23-2009 01:07 PM

did you use the beer for the finish as well? is it FDA approved?

-- The woods are lovely, dark and deep, but I have promises to keep...

View ellen35's profile

ellen35

2742 posts in 3942 days


#3 posted 06-23-2009 01:12 PM

Larry,
All very nice…as usual.
You are one cool Aussie!
Ellen

-- "Don't let the perfect be the enemy of the good." Voltaire

View Splinterman's profile

Splinterman

23074 posts in 3870 days


#4 posted 06-23-2009 01:13 PM

As usual….first class.

View bowyer's profile

bowyer

340 posts in 3905 days


#5 posted 06-23-2009 01:50 PM

Nice color comdinations, the yellow back ground really make the X’s POP! Cutting board looks good too!

Rick

-- If at first you don't succeed...Don't try skydiving

View patron's profile

patron

13654 posts in 3850 days


#6 posted 06-23-2009 02:36 PM

how do you do this ,
i can’t get my pine to look like this ?
old milwaukee never tasted this good !

-- david - only thru kindness can this world be whole . If we don't succeed we run the risk of failure. Dan Quayle

View Karson's profile

Karson

35201 posts in 4910 days


#7 posted 06-23-2009 03:03 PM

That must be a no name brand. All they have are a bunch of XXXX.

Nice cutting board.

-- I've been blessed with a father who liked to tinker in wood, and a wife who lets me tinker in wood. Appomattox Virginia [email protected]

View Jeff's profile

Jeff

95 posts in 3807 days


#8 posted 06-23-2009 04:15 PM

Nice looking cutting board. Looks like racing stripes. You may want to blog about your project before you start drinking next time, haha!

-- - In the end, everything will be okay. If it isn't okay, it isn't the end yet.

View eddy's profile

eddy

939 posts in 3874 days


#9 posted 06-23-2009 04:18 PM

looks real nice i will have too add this to my list of projects

-- self proclaimed copycat

View Loucarb's profile

Loucarb

2388 posts in 3954 days


#10 posted 06-23-2009 11:21 PM

Another great looking board.

View a1Jim's profile

a1Jim

117722 posts in 4086 days


#11 posted 06-23-2009 11:34 PM

I think you could make these boards in your sleep by now another beaut You forgot to plug that knot hole LOL

View Dusty56's profile

Dusty56

11852 posts in 4197 days


#12 posted 06-23-2009 11:48 PM

Hi Larry …nice job and can you send me some of that bottled inspiration !
I’ve kept an eye out for the “SpiroCrafter” as you suggested and don’t hate me now , but I picked one up at WoodCraft today for $14.99….normal price there is $39.99 : )

-- I'm absolutely positive that I couldn't be more uncertain!

View Beginningwoodworker's profile

Beginningwoodworker

13345 posts in 4182 days


#13 posted 06-24-2009 12:37 AM

Hey Larry, Beers and Woodworking dont mix. :)

View degoose's profile

degoose

7258 posts in 3864 days


#14 posted 06-24-2009 01:00 AM

Len good pickup,, its fun to use.
Chuck, lighten up . I don’t drink while I am using power tools.. I might spill it. Seriously though I am safety conscious and only have a beer after all the sawing and planing is done. After I shut down for the day, then and only then is it time for inspiration,,!!!
BTW Jim I did make this one in my sleep that’s why I didn’t see the knot hole until after I had drilled it.

-- Don't drink and use power tools @ lasercreationsbylarry.com.au

View TopamaxSurvivor's profile

TopamaxSurvivor

18671 posts in 4185 days


#15 posted 06-24-2009 08:10 AM

That must be an awfully early one, pretty simple and strainght forward for you , Larry ;-))

-- Bob in WW ~ "some old things are lovely, warm still with life ... of the forgotten men who made them." - D.H. Lawrence

showing 1 through 15 of 18 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com